Cylinder Block for 2006 Dodge Durango
No.
Part # / Description / Price
Price
N/A
Dowel Pin, Mounting 
Mopar
Mopar Description: Item 13 Pin Kit Also Contained in Short Block Engine Kit. All Plugs And Dowel Pins Must Be Installed On Cylinder Block Before Installing Engine.. Cylinder Heads To Cylinder Block
MSRP $9.45
$6.78
MSRP $9.45
$6.78
N/A
Engine Lower Gasket Package Mopar
Mopar Notes: Engines: 5.7L V8 HEMI MDS ENGINE.
Description: See Notes. Lower.
N/A
Long Block Engine 1 Mopar
Mopar Notes: Engines: 5.7L V8 HEMI MDS ENGINE.
Description: SERVICE WARNING: If The Orginal Engine Has Experienced A Catastrophic Failure - Including Piston, Cylinder Bore, Valve, or Valve Seat Failure - The Intake Manifold Must Be Replaced With A New Manifold.. An Updated Cylinder Head With A EGR Valve Hole May Be Received In Place Of The Old. If Vehicle Did Not Orginally Have A EGR Valve Use Cover Kit 53032739AA To Cover The Hole In The EGR Hole In The Cylinder Head.
MSRP $8,070.00
$6,567.25
MSRP $8,070.00
$6,567.25
N/A
Plug, Right And Left Mopar
Mopar Description: .250-18X.690. Cylinder Block Coolant Drain
MSRP $13.95
$10.04
MSRP $13.95
$10.04
N/A
MSRP $138.00
$91.80
N/A
Hex Head Bolt And Washer, Mounting Mopar
Mopar Description: M10x1.50x45.00. Structural Collar To Transmission. Late Production
MSRP $7.60
$5.38
MSRP $7.60
$5.38
2
Short Block Engine, Remanufactured 1 Mopar
Mopar Notes: Engines: 5.7L V8 HEMI MDS ENGINE.
Description: SERVICE WARNING: If The Orginal Engine Has Experiencd A Catastrophic Failure - Including Piston, Cylinder Bore, Valve, or Valve Seat Failure - The Intake Manifold Must Be Replaced With A New Manifold.
4
MSRP $9.75
$6.96
5
Hex Socket Plug Mopar
Mopar Description: 3/8-18NPTx.475. Also Serviced With Cover. Chain Case Cover
MSRP $10.35
$7.44
MSRP $10.35
$7.44
7
Pipe Plug Mopar
Mopar Description: .250-18X.413. Oil Gallery Middle and Right Rear Of Cylinder Block
MSRP $5.15
$3.63
MSRP $5.15
$3.63
10
Block To Clutch Housing Dowel, Mounting Mopar
Mopar Description: [1/2 x 3/4]. Cylinder Block To Transmission
MSRP $12.50
$8.89
MSRP $12.50
$8.89
14
Hex Head Bolt And Coned Washer, Mounting Mopar
Mopar Description: M6X1.00X20.00. Camshaft Thrust Plate To Cylinder Block
1 This price excludes a refundable manufacturer's core charge. Add the part to your cart to see the core charge.